No OneTemporary
Actions

Size

26 KB

Referenced Files

None

Subscribers

None

View Options

	diff --git a/src/rabbitmq-tcl.c b/src/rabbitmq-tcl.c
	index 4d1821d..12a04d8 100644
	--- a/src/rabbitmq-tcl.c
	+++ b/src/rabbitmq-tcl.c
	@@ -1,807 +1,807 @@
	/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
	*
	* ___ __ \_____ ___ /____ /____(_)_ /___ \|/ /_ __ \
	* __ /_/ / __ `/_ __ \_ __ \_ /_ __/_ /\|_/ /_ / / /
	* _ _, _// /_/ /_ /_/ / /_/ / / / /_ _ / / / / /_/ /
	* /_/ \|_\| \__,_/ /_.___//_.___//_/ \__/ /_/ /_/ \___\_\
	* _____________________
	* RabbitMQ C AMQP client library TCL wrapper ___ __/_ ____/__ /
	* TCL module to connect to AMQP brokers. __ / _ / __ /
	* _ / / /___ _ /___
	* (c) 2015, Nasqueron, some rights reserved. /_/ \____/ /_____/
	* Released under BSD-2-Clause license.
	*
	* Provides a TCL rabbitmq.so module to get a 'mq' TCL command.
	*
	* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */

	#include <stdlib.h>
	#include <string.h>

	#include <tcl.h>

	#include <amqp_tcp_socket.h>
	#include <amqp.h>
	#include <amqp_framing.h>

	#ifdef USE_E4C
	#include "../vendor/e4c/e4c.h"
	#endif

	#include "config.h"
	#include "version.h"
	#include "rabbitmq-tcl.h"

	/* -------------------------------------------------------------
	Broker connections
	- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */

	/**
	* Represents a connection with the broker, and stores properties.
	*/
	struct broker_connection {
	int connected; /* 0 if disconnected, 1 if connected */
	amqp_connection_state_t connection;
	} brokerConnections[MQ_COMMANDS_AMOUNT];

	/**
	* Represents the client data information for a command.
	*/
	struct command_context {
	int commandNumber;
	};

	/* -------------------------------------------------------------
	Helper functions
	- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */

	/**
	* Gets product version string
	*
	* @return The product name and version
	*/
	char *get_version_string() {
	char versionString = malloc(256 sizeof(char));
	sprintf(versionString, "%s %s", PRODUCT_NAME, PRODUCT_VERSION);
	return versionString;
	}

	/**
	* Determines if the specified connection slot is currently connected
	*
	* @param connectionNumber the number of the connection to check
	* @return 1 if connected, 0 if disconnected
	*/
	int is_mq_connected(int connectionNumber) {
	return brokerConnections[connectionNumber].connected;
	}

	/**
	* Determines if the connection will probably be non blocking
	*
	* @return 1 if the operation should be non blocking ; 0 on block
	*/
	int amqp_will_be_non_blocking_operation(amqp_connection_state_t connection) {
	// See
	// http://lists.rabbitmq.com/pipermail/rabbitmq-discuss/2012-February/018188.html
	return amqp_frames_enqueued(connection) \|\| amqp_data_in_buffer(connection);

	// TODO: at the stage, we can try a third solution: run amqp_get_sockfd()
	// to get the socket descriptor, then call select() or poll().
	// If the socket can be read, we can return true.
	}

	/**
	* Prints an error message as command result and notify TCL an error occured.
	*
	* @param[out] tclInterpreter The interpreter in which to set result
	* @param[in] error The error message
	* @return TCL_ERROR
	*/
	int tcl_error(Tcl_Interp tclInterpreter, char error) {
	Tcl_SetResult(tclInterpreter, error, TCL_STATIC);
	return TCL_ERROR;
	}

	#ifdef USE_E4C
	/**
	* Prints an E4C exception message and notifies TCL an error occured.
	*
	* @param[out] tclInterpreter The interpreter in which to set result
	* @return TCL_ERROR
	*/
	int tcl_exception(Tcl_Interp *tclInterpreter) {
	const e4c_exception *exception = e4c_get_exception();
	return tcl_error(tclInterpreter, strdup(exception->message));
	}
	#endif

	/**
	* Gets a broker error
	*
	* @param[in] connection The AMQP connection
	* @param[out] rcpReply The AMQP RPC reply
	* @return 1 if an error occured, 0 if not
	*/
	int amqp_get_error(amqp_connection_state_t connection,
	amqp_rpc_reply_t *rpcReply) {
	amqp_rpc_reply_t reply = amqp_get_rpc_reply(connection);
	rpcReply = &reply;
	return reply.reply_type != AMQP_RESPONSE_NORMAL;
	}

	/**
	* Determines the AMQP error from the server RPC reply, prints an error message
	* based on this error and the specified context, then notify TCL an error
	* occured.
	*
	* @param[out] tclInterpreter The interpreter in which to set result
	* @param[in] errorContext The context of the error message, typically what were
	* done at the moment of the error
	* @param[in] rcpReply The AMQP RPC reply
	* @return TCL_ERROR
	*/
	int tcl_amqp_error(Tcl_Interp tclInterpreter, const char errorContext,
	amqp_rpc_reply_t rpcReply, int connectionNumber) {
	char *error;

	if (rpcReply.reply_type == AMQP_RESPONSE_NORMAL) {
	// Not an error
	return TCL_OK;
	}

	error = malloc(1024 * sizeof(char));
	if (rpcReply.reply_type == AMQP_RESPONSE_NONE) {
	sprintf(error, "%s a broker error occurred, but with an unexpected RPC "
	"reply type. Please report this bug as issue.",
	errorContext);
	} else if (rpcReply.reply_type == AMQP_RESPONSE_LIBRARY_EXCEPTION) {
	sprintf(error, "%s %s", errorContext,
	amqp_error_string2(rpcReply.library_error));
	} else if (rpcReply.reply_type == AMQP_RESPONSE_SERVER_EXCEPTION) {
	if (rpcReply.reply.id == AMQP_CONNECTION_CLOSE_METHOD) {
	amqp_connection_close_t *m =
	(amqp_connection_close_t *)rpcReply.reply.decoded;
	sprintf(error,
	"%s a server connection error %d occurred, message: %.*s",
	errorContext, m->reply_code, (int)m->reply_text.len,
	(char *)m->reply_text.bytes);
	// Marks the connection as disconnected
	brokerConnections[connectionNumber].connected = 0;
	} else if (rpcReply.reply.id == AMQP_CHANNEL_CLOSE_METHOD) {
	amqp_channel_close_t *m =
	(amqp_channel_close_t *)rpcReply.reply.decoded;
	sprintf(error, "%s a server channel error %d occurred: %.*s",
	errorContext, m->reply_code, (int)m->reply_text.len,
	(char *)m->reply_text.bytes);
	} else {
	sprintf(error,
	"%s an unknown server error occurred, method id 0x%08X",
	errorContext, rpcReply.reply.id);
	}
	}

	return tcl_error(tclInterpreter, error);
	}

	/* -------------------------------------------------------------
	TCL commands

	mq
	- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */

	/**
	* mq command
	*
	* @param[in] clientData The context with the command number
	* @param[out] tclInterpreter The interpreter calling this function
	* @param[in] argc The amount of command arguments
	* @param[in] argv The command arguments
	* @return TCL_OK, TCL_ERROR, TCL_RETURN, TCL_BREAK or TCL_CONTINUE
	*/
	static int mq_command(ClientData clientData, Tcl_Interp *tclInterpreter,
	int argc, Tcl_Obj *const argv[]) {
	int connectionNumber;
	char *command;
	struct command_context *context;

	// Parses arguments and prepares context

	if (argc < 2) {
	return mq_usage(tclInterpreter);
	}

	context = clientData;
	connectionNumber = context->commandNumber;
	command = Tcl_GetString(argv[1]);

	// Run the command
	// We drop "mq <command>" from argv and pass the rest as parameters.
	//
	// If exceptions4c is needed, we wrap the call inside a try/catch block.
	// This allows to avoid a crash if something is wrong in librabbitmq.

	argc -= 2;
	argv += 2;

	#ifdef USE_E4C
	int result; // TCL_OK or TCL_ERROR
	volatile int status = 1; // will be 0 if an exception occurs
	const e4c_signal_mapping *old_mappings;

	e4c_reusing_context(status, 0) {

	// Hijacks the signal processing during the mq ... runtime
	old_mappings = e4c_context_get_signal_mappings();
	e4c_context_set_signal_mappings(e4c_default_signal_mappings);

	try {
	// We can't return inside a try/catch block, so we store the result
	// in a variable. We'll return it after restoring the signal table.
	result = call_mq_command(connectionNumber, tclInterpreter, command,
	argc, argv);
	} catch (RuntimeException) {
	// If an exception occurs, tcl_exception will print the exception
	// message (e.g. "segmentation violation" if we've got a SIGSEGV).
	// The result here will always be TCL_ERROR.
	result = tcl_exception(tclInterpreter);
	}

	e4c_context_set_signal_mappings(old_mappings);
	}

	return result;
	#else
	return call_mq_command(connectionNumber, tclInterpreter, command, argc,
	argv);
	#endif
	}

	/**
	* Calls the relevant mq command and returns result
	*
	* @param[in] connectionNumber The connection offset (0 for mq, 1 for mq1,
	*…)
	* @param[out] tclInterpreter The interpreter calling this function
	* @param[in] argc The amount of command arguments
	* @param[in] argv The command arguments
	* @return TCL_OK, TCL_ERROR, TCL_RETURN, TCL_BREAK or TCL_CONTINUE
	*/
	int call_mq_command(int connectionNumber, Tcl_Interp *tclInterpreter,
	char command, int argc, Tcl_Obj const argv[]) {
	if (strcmp(command, "bindqueue") == 0) {
	return mq_bindqueue(connectionNumber, tclInterpreter, argc, argv);
	} else if (strcmp(command, "connect") == 0) {
	return mq_connect(connectionNumber, tclInterpreter, argc, argv);
	} else if (strcmp(command, "connected") == 0) {
	return mq_connected(connectionNumber, tclInterpreter);
	} else if (strcmp(command, "disconnect") == 0) {
	return mq_disconnect(connectionNumber, tclInterpreter);
	} else if (strcmp(command, "get") == 0) {
	return mq_get(connectionNumber, tclInterpreter, argc, argv);
	} else if (strcmp(command, "publish") == 0) {
	return mq_publish(connectionNumber, tclInterpreter, argc, argv);
	} else if (strcmp(command, "version") == 0) {
	return mq_version(tclInterpreter);
	} else {
	return mq_usage(tclInterpreter);
	}
	}

	/**
	* mq [not existing command] usage output
	*
	* @param[out] tclInterpreter The interpreter to send command result to
	*/
	int mq_usage(Tcl_Interp *tclInterpreter) {
	return tcl_error(tclInterpreter, "Usage: mq "
	"<bindqueue\|connect\|connected\|disconnect\|"
	"get\|publish\|version>");
	}

	/**
	* mq version
	*
	* @param[out] tclInterpreter The interpreter calling this function
	* @return TCL_OK
	*/
	int mq_version(Tcl_Interp *tclInterpreter) {
	Tcl_SetResult(tclInterpreter, get_version_string(), TCL_STATIC);
	return TCL_OK;
	}

	/**
	* mq connect
	*
	* @param[in] connectionNumber The connection offset (0 for mq, 1 for mq1, …)
	* @param[out] tclInterpreter The interpreter calling this function
	* @param[in] argc The amount of command arguments
	* @param[in] argv The command arguments
	* @return TCL_OK on success, TCL_ERROR if already connected or can't connect
	*/
	int mq_connect(int connectionNumber, Tcl_Interp *tclInterpreter, int argc,
	Tcl_Obj *const argv[]) {

	char host, hostPortExpression, user, pass, *vhost;
	int port, status;
	amqp_connection_state_t conn;
	amqp_socket_t *socket;
	amqp_rpc_reply_t result;

	// We don't allow to reconnect without first used mq disconnect

	if (is_mq_connected(connectionNumber)) {
	return tcl_error(tclInterpreter, "Already connected.");
	}

	// Connection parameters

	if (argc > 0 && argv[0]) {
	hostPortExpression = Tcl_GetString(argv[0]);
	host = get_host(hostPortExpression, BROKER_HOST);
	port = get_port(hostPortExpression, BROKER_PORT);
	} else {
	host = BROKER_HOST;
	port = BROKER_PORT;
	}
	if (argc > 1 && argv[1]) {
	user = Tcl_GetString(argv[1]);
	} else {
	user = BROKER_USER;
	}
	if (argc > 2 && argv[2]) {
	pass = Tcl_GetString(argv[2]);
	} else {
	pass = BROKER_PASS;
	}
	if (argc > 3 && argv[3]) {
	vhost = Tcl_GetString(argv[3]);
	} else {
	vhost = BROKER_VHOST;
	}

	// Opens a TCP connection to the broker

	conn = amqp_new_connection();
	socket = amqp_tcp_socket_new(conn);
	if (!socket) {
	return tcl_error(tclInterpreter, "Can't create TCP socket.");
	}

	status = amqp_socket_open(socket, host, port);
	if (status) {
	return tcl_error(tclInterpreter, "Can't connect to the broker.");
	}

	// Logins to the broker
	// No heartbeat, unlimited channels, 128K (131072) frame size
	result = amqp_login(conn, vhost, 0, 131072, 0, AMQP_SASL_METHOD_PLAIN, user,
	pass);
	if (result.reply_type != AMQP_RESPONSE_NORMAL) {
	return tcl_error(tclInterpreter, "Can't login to the broker.");
	}

	// Opens a first channel
	amqp_channel_open(conn, 1);
	if (amqp_get_error(conn, &result)) {
	return tcl_amqp_error(tclInterpreter, "Can't open a channel:", result,
	connectionNumber);
	}

	// We're connected. All is good.
	brokerConnections[connectionNumber].connection = conn;
	brokerConnections[connectionNumber].connected = 1;
	return TCL_OK;
	}

	/**
	* mq disconnect
	*
	* @param[in] connectionNumber The connection offset (0 for mq, 1 for mq1, …)
	* @param[out] tclInterpreter The interpreter calling this function
	* @return TCL_OK on success, TCL_ERROR if not connected
	*/
	int mq_disconnect(int connectionNumber, Tcl_Interp *tclInterpreter) {
	amqp_rpc_reply_t result;

	if (!is_mq_connected(connectionNumber)) {
	return tcl_error(tclInterpreter, "Not connected.");
	}

	// We mark early as disconnected, to allow to recycle the slot
	// event if an error occurs during disconnect.
	brokerConnections[connectionNumber].connected = 0;

	amqp_connection_state_t conn =
	brokerConnections[connectionNumber].connection;

	result = amqp_channel_close(conn, 1, AMQP_REPLY_SUCCESS);
	if (result.reply_type != AMQP_RESPONSE_NORMAL) {
	return tcl_amqp_error(tclInterpreter,
	"An error occured closing channel:", result,
	connectionNumber);
	}
	result = amqp_connection_close(conn, AMQP_REPLY_SUCCESS);
	if (result.reply_type != AMQP_RESPONSE_NORMAL) {
	return tcl_amqp_error(tclInterpreter,
	"An error occured closing connection:", result,
	connectionNumber);
	}

	amqp_destroy_connection(conn);
	return TCL_OK;
	}

	/**
	* mq connected
	*
	* @param[in] connectionNumber The connection offset (0 for mq, 1 for mq1, …)
	* @param[out] tclInterpreter The interpreter calling this function
	* @return TCL_OK
	*/
	int mq_connected(int connectionNumber, Tcl_Interp *tclInterpreter) {
	char reply = malloc(2 sizeof(char));
	sprintf(reply, "%d", is_mq_connected(connectionNumber));
	Tcl_SetResult(tclInterpreter, reply, TCL_STATIC);
	return TCL_OK;
	}

	/**
	* mq get <queue> [-noack]
	*/
	int mq_get(int connectionNumber, Tcl_Interp *tclInterpreter, int argc,
	Tcl_Obj *const argv[]) {
	char *queue;
	char *argument;
	char *error;
	char *messageBody;
	amqp_boolean_t noAck = 0;

	amqp_connection_state_t conn;
	amqp_rpc_reply_t result;
	amqp_message_t message;

	// Parses arguments
	if (argc == 0) {
	return tcl_error(tclInterpreter, "Required queue missing.");
	}
	queue = Tcl_GetString(argv[0]);

	if (argc > 1) {
	argument = Tcl_GetString(argv[1]);
	if (strcmp(argument, "-noack") == 0) {
	noAck = 1;
	} else {
	error = malloc(1024 * sizeof(char));
	sprintf(error, "Unknown argument: %s", argument);
	return tcl_error(tclInterpreter, error);
	}
	}
	if (argc > 2) {
	return tcl_error(tclInterpreter, "Too many arguments.");
	}

	// Ensures we're connected
	if (!is_mq_connected(connectionNumber)) {
	return tcl_error(tclInterpreter, "Not connected.");
	}
	conn = brokerConnections[connectionNumber].connection;

	// Gets message from specified queue (basic.get operation)
	result = amqp_basic_get(conn, 1, amqp_cstring_bytes(queue), noAck);
	if (amqp_get_error(conn, &result)) {
	return tcl_amqp_error(tclInterpreter, "Can't get message from queue:",
	result, connectionNumber);
	}

	if (!amqp_will_be_non_blocking_operation(conn)) {
	// We can't assert the operation will be non blocking
	return TCL_OK;
	}

	result = amqp_read_message(conn, 1, &message, 0);
	if (amqp_get_error(conn, &result)) {
	return tcl_amqp_error(tclInterpreter, "Can't read message:", result,
	connectionNumber);
	}

	- if (&message && &(message.body)) {
	+ if (&(message.body)) {
	messageBody = malloc(message.body.len + 1024);
	sprintf(messageBody, "%.*s", (int)message.body.len,
	(char *)message.body.bytes);

	// Cleans up
	amqp_destroy_message(&message);
	amqp_maybe_release_buffers(conn);
	}

	// TCL return
	Tcl_SetResult(tclInterpreter, messageBody, TCL_STATIC);

	return TCL_OK;
	}

	/**
	* mq bindqueue <exchange> [binding key]
	*/
	int mq_bindqueue(int connectionNumber, Tcl_Interp *tclInterpreter, int argc,
	Tcl_Obj *const argv[]) {
	char exchange, exchangeType, *bindingKey;
	amqp_bytes_t queueName;
	amqp_queue_declare_ok_t *queueResult;
	amqp_connection_state_t conn;
	amqp_rpc_reply_t result;

	// Parses arguments
	if (argc == 0) {
	return tcl_error(tclInterpreter, "Argument required: exchange.");
	}
	exchange = Tcl_GetString(argv[0]);

	if (argc > 1) {
	bindingKey = Tcl_GetString(argv[1]);
	} else {
	bindingKey = BROKER_DEFAULT_BINDING_KEY;
	}

	if (argc > 2) {
	return tcl_error(tclInterpreter, "Too many arguments.");
	}

	// Ensures we're connected
	if (!is_mq_connected(connectionNumber)) {
	return tcl_error(tclInterpreter, "Not connected.");
	}

	conn = brokerConnections[connectionNumber].connection;

	// Declares the exchange
	exchangeType = BROKER_DEFAULT_EXCHANGE_TYPE;
	amqp_exchange_declare(conn, 1, amqp_cstring_bytes(exchange),
	amqp_cstring_bytes(exchangeType), 0, 0, 0, 0,
	amqp_empty_table);

	if (amqp_get_error(conn, &result)) {
	return tcl_amqp_error(tclInterpreter, "Can't declare exchange:", result,
	connectionNumber);
	}

	// Declares a new temporary queue
	queueResult = amqp_queue_declare(conn, 1, amqp_empty_bytes, 0, 0, 0, 1,
	amqp_empty_table);
	if (amqp_get_error(conn, &result)) {
	return tcl_amqp_error(tclInterpreter, "Can't declare queue:", result,
	connectionNumber);
	}
	queueName = amqp_bytes_malloc_dup(queueResult->queue);
	if (queueName.bytes == NULL) {
	return tcl_error(tclInterpreter,
	"Out of memory while copying queue name.");
	}

	// Binds it to the specified exchange
	amqp_queue_bind(conn, 1, queueName, amqp_cstring_bytes(exchange),
	amqp_cstring_bytes(bindingKey), amqp_empty_table);
	if (amqp_get_error(conn, &result)) {
	return tcl_amqp_error(tclInterpreter, "Can't bind queue:", result,
	connectionNumber);
	}

	// Stores queue name as result
	Tcl_SetObjResult(tclInterpreter,
	Tcl_NewStringObj(queueName.bytes, queueName.len));
	return TCL_OK;
	}

	/**
	*
	* mq publish <target> [-key <routing key>] [-mandatory] [-immediate] <message>
	*
	* The target could be: <exchange>, -exchange <exchange> or -queue <queue>
	*
	* @param[in] connectionNumber The connection offset (0 for mq, 1 for mq1, …)
	* @param[out] tclInterpreter The interpreter calling this function
	* @param[in] argc The amount of command arguments
	* @param[in] argv The command arguments
	* @return TCL_OK on success, TCL_ERROR if already connected or can't connect
	*/
	int mq_publish(int connectionNumber, Tcl_Interp *tclInterpreter, int argc,
	Tcl_Obj *const argv[]) {
	int i;
	amqp_connection_state_t conn;
	amqp_rpc_reply_t result;
	char argument, exchange, routingKey, content;
	int contentParsed = 0;
	int targetParsed = 0;
	int routingKeyParsed = 0;
	int mustRouteToQueue = 0; // -mandatory
	int mustImmediatelyDeliverToConsumer = 0; // -immediate

	// Parses arguments
	for (i = 0; i < argc; i++) {
	argument = Tcl_GetString(argv[i]);
	if (strcmp(argument, "-key") == 0) {
	if (argc < i + 2) {
	return tcl_error(tclInterpreter,
	"Required routing key argument missing.");
	}
	routingKey = Tcl_GetString(argv[++i]);
	routingKeyParsed = 1;
	} else if (strcmp(argument, "-mandatory") == 0) {
	mustRouteToQueue = 1;
	} else if (strcmp(argument, "-immediate") == 0) {
	mustImmediatelyDeliverToConsumer = 1;
	} else if (strcmp(argument, "-exchange") == 0) {
	if (argc < i + 2) {
	return tcl_error(tclInterpreter,
	"Required exchange argument missing.");
	}
	exchange = Tcl_GetString(argv[++i]);
	targetParsed = 1;
	} else if (strcmp(argument, "-queue") == 0) {
	if (argc < i + 2) {
	return tcl_error(tclInterpreter,
	"Required queue argument missing.");
	}
	exchange = BROKER_DEFAULT_EXCHANGE;
	routingKey = Tcl_GetString(argv[++i]);
	targetParsed = 1;
	routingKeyParsed = 1;
	} else if (i == 0) {
	exchange = Tcl_GetString(argv[0]);
	targetParsed = 1;
	} else {
	content = Tcl_GetString(argv[i]);
	contentParsed = 1;
	}
	}

	if (!routingKeyParsed) {
	routingKey = BROKER_DEFAULT_ROUTING_KEY;
	}

	// Throws error when we haven't enough information (what and where)
	if (!targetParsed) {
	return tcl_error(tclInterpreter, "Required message target missing.");
	}

	if (!contentParsed) {
	return tcl_error(tclInterpreter,
	"Required message content argument missing.");
	}

	// Ensures we're connected
	if (!is_mq_connected(connectionNumber)) {
	return tcl_error(tclInterpreter, "Not connected.");
	}

	// Sends the message and checks the result
	conn = brokerConnections[connectionNumber].connection;
	amqp_basic_publish(conn, 1, amqp_cstring_bytes(exchange),
	amqp_cstring_bytes(routingKey), mustRouteToQueue,
	mustImmediatelyDeliverToConsumer, NULL,
	amqp_cstring_bytes(content));

	if (amqp_get_error(conn, &result)) {
	return tcl_amqp_error(tclInterpreter, "Can't publish message:", result,
	connectionNumber);
	}

	#ifdef DEBUG
	char debugMessage = malloc(1024 sizeof(char) + sizeof(content));
	sprintf(
	debugMessage,
	"Message published to exchange '%s', routing key '%s'. Content: '%s'.",
	exchange, routingKey, content);
	Tcl_SetResult(tclInterpreter, debugMessage, TCL_STATIC);
	#endif

	return TCL_OK;
	}

	/* -------------------------------------------------------------
	TCL initialisation code

	Creation of the mq and mq2-10 commands.
	- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */

	#ifdef WINDOWS
	extern __declspec(dllexport) int Rabbitmq_Init(Tcl_Interp *tclInterpreter);
	#else
	extern int Rabbitmq_Init(Tcl_Interp *tclInterpreter);
	#endif

	/**
	* Determines TCL environment is correct and initiliazes stubs if needed
	*
	* @param[out] tclInterpreter The current TCL interpreter
	* @return 1 on success; otherwise, 0
	*/
	int tcl_init(Tcl_Interp *tclInterpreter) {
	// This extension requires TCL 8.0+
	if (Tcl_PkgRequire(tclInterpreter, "Tcl", TCL_VERSION, 0) == NULL) {
	if (TCL_VERSION[0] == '7') {
	if (Tcl_PkgRequire(tclInterpreter, "Tcl", "8.0", 0) == NULL) {
	return 0;
	}
	}
	}

	#if USE_TCL_STUBS
	// Initializes stubs (requires TCL 8.1+)
	if (Tcl_InitStubs(tclInterpreter, "8.1", 0) == NULL) {
	return 0;
	}
	#endif

	return 1;
	}

	/**
	* Gets command context
	*
	* @param commandNumber The command number (3 for mq3)
	* @return the command context
	*/
	ClientData get_mq_command_context(int commandNumber) {
	struct command_context *context = malloc(sizeof(int));
	context->commandNumber = commandNumber;
	return context;
	}

	/**
	* Creates TCL commands
	*
	* @param[out] tclInterpreter The current TCL interpreter
	*/
	void tcl_create_commands(Tcl_Interp *tclInterpreter) {
	int i;
	char commandName[10];

	// Creates mq and mq1-mq10 commands
	for (i = 0; i <= MQ_COMMANDS_AMOUNT; i++) {
	if (i == 0) {
	strcpy(commandName, "mq");
	} else {
	sprintf(commandName, "mq%d", i);
	}

	Tcl_CreateObjCommand(tclInterpreter, commandName, mq_command,
	get_mq_command_context(i),
	(Tcl_CmdDeleteProc *)NULL);

	brokerConnections[i].connected = 0;
	}
	}

	/**
	* Provides TCL package
	*
	* @param[out] tclInterpreter The current TCL interpreter
	*/
	int tcl_provide_package(Tcl_Interp *tclInterpreter) {
	int result;

	result = Tcl_PkgProvide(tclInterpreter, PACKAGE_NAME, PACKAGE_VERSION);
	return (result != TCL_ERROR);
	}

	/**
	* Initializes the library and provide mq commands
	*
	* @param[out] tclInterpreter The current TCL interpreter to provide commands to
	* @return TCL_OK on success; otherwise, TCL_ERROR
	*/
	int Rabbitmq_Init(Tcl_Interp *tclInterpreter) {
	if (!tcl_init(tclInterpreter)) {
	return TCL_ERROR;
	}

	tcl_create_commands(tclInterpreter);

	if (!tcl_provide_package(tclInterpreter)) {
	return TCL_ERROR;
	}

	return TCL_OK;
	}

File Metadata

Mime Type: text/x-diff
Expires: Mon, Nov 25, 12:16 (1 d, 12 h)
Storage Engine: blob
Storage Format: Raw Data
Storage Handle: 2260154
Default Alt Text: (26 KB)

No OneTemporaryActions

View Options

File Metadata

Event Timeline

No OneTemporary
Actions