Page MenuHomeDevCentral
Files F3769063

No OneTemporary
Actions

View Options

diff --git a/beta/source/defines.h.in b/beta/source/defines.h.in
index 486635a..72361b0 100755
--- a/beta/source/defines.h.in
+++ b/beta/source/defines.h.in
@@ -1,891 +1,924 @@
/* @configure_input@ */
#ifdef HAVE_CONFIG_H
#include <config.h>
#endif
/* defines.h
*** Darkbot (c) 2002
* The Internet Relay Chat Talking Robot
*
*** Darkbot Creator - Jason Hamilton (play) Jason@superlink.net
* Project Administrator - LuizCB (Pincel) LuizCB@darkbot.info
* Recent Code Modifications - Ron (`ron) ron@darkbot.org
*
* Official Sites: http://www.darkbot.org
* http://darkbot.sourceforge.net
*
*** For any questions, suggestions, malfunctions, etc
* Use our support forum at http://forum.darkbot.org
*
* *******************************---******************************* */
/*
*** NOTES - READ before you start:
*** Lines beginning by # (hash) are peprocessor directives, they are not
* comments. You should NOT remove them.
*** #defines should only be changed to ON, OFF, #define, #undef
* or it's value defined on the very right end.
*** Areas between " " are messages Darkbot will send. Do not remove " ".
*** Double slash characters on de beginning of a line or slaches followed
* or preceded by * on the beginning and end of lines envolving some
* portion of text are comment characters combinations with help
* information for the delelopers or users. They do not have any effect
* in the behavior of the program.
*
,-----------------------------------------------------------------,
| Note that the defines bellow are the RECOMMENDED settings! |
| Modify it by changing it's values of the data. This file will |
| instruct the compiler to build the executable file. If you're |
| not sure of what to do, leave the default settings alone :) |
`-----------------------------------------------------------------' */
/* ================ SYSTEM REQUIREMENTS ================ */
/*
* Change the Ansi C signal handling below if it's not in the standard place,
* usually on include/. Leave it as is if you don't know what that is. Type
* 'man signal' on your unix box for more info.
* (default = <signal.h>)
*/
//#include <signal.h>
/*
* Most BSD systems will not need this. If your bot will
* connect but don't react at all try turning this ON.
* (default = OFF)
*/
//#define NEED_LIBC5 OFF
/*
* SGI boxes (ie; IRIX system) need this
* define to run. (default = OFF)
*/
//#define SGI OFF
/* ================ LANGUAGE ================ */
/*
* Pick a number from the list below for the language you
* want your darkbot to speak. Default is 1, English.
* ------------------------------------------------------------------
* 1 = ENGLISH - play <jason@superlink.net>
* 2 = FRENCH - Inajira <inajira@videotron.ca>
* - EfX <michel.efx@globetrotter.net>
* - eCHaLoTTe <echalotte@cablevision.qc.ca>
* 3 = SPANISH - speed1 <speed@eduredes.edu.do>
* 4 = DUTCH - Asmodai <asmodai@wxs.nl>
* 5 = LATIN - Otaku <otaku@unixgeek.ml.org>
* 6 = GREEK - Chris_CY <chriscy@cylink.net>
* 7 = EBONICS - rapsux <bitter@ici.net>
* 8 = PIG LATIN- Cloud <burtner@usa.net>
* 9 = RUSSIAN - KOI8 encoding
* 10= RUSSIAN - CP1251 encoding
* - Oleg Drokin <green@ccssu.crimea.ua>
* 11= PORTUGUESE- Pincel <Pincel@darkbot.info>
* 12= GERMAN - C.Hoegl@gmx.net & marc@reymann.net
* 13= ITALIAN - daniele nicolucci <jollino@icemail.it>
* 14= CHINESE - James <jamespower@263.net>
* 15= SWEDISH - Ybznek <sunmo@seaside.se>
* 16= NORWEGIAN- [SoHo] <soho@int19h.com>
* 17= ROMANIAN - Radu <radu.negoescu@sante.univ-nantes.fr>
* 18= ARABIC - MrSiMo <mrsimo7@yahoo.fr>
* 19= TAIWANISH- ?
* ------------------------------------------------------------------
* ? = Email juice@darkbot.org if you want to help add other langs!
* ------------------------------------------------------------------
*/
//#define LANG 1
/* ================ STARTUP, CONNECTION, IRC ================ */
/* ==== ON START ==== */
/*
* Your darkbot tell you (at startup) what the latest version of
* darkbot is. If you DO NOT WANT THIS, then define this. We recommend
* keeping this defined.
*/
//#define ENABLE_VERSION_CHECK
/* ==== ON CONNECTION ==== */
/*
* Print out extra details while starting up?
*/
//#define VERB
/*
* Check if servers are not responding, is so
* connect to next server in list. (recommended)
* Some linux systems have problems with this.
* You'll know if you're one of them if your bot
* disconnects every 5 minutes.
*
* ALSO NOTE: If your bot seems to disconnect every 5 minutes, try
* turning off the CHECK_STONED code.
*/
//#define CHECK_STONED ON
/*
* This is the time that darkbot will wait for a connection
* to the server, before trying the next server. You may need
* to increase this if you are on a slow connection.
*/
//#define CONNECT_WAIT_TIMEOUT 10
/* ==== ON CONNECTED - IRC ==== */
/*
* Send everything that's in PERFORM.INI
* to the IRC server every 60 seconds?
* Useful if the bot is banned, or X was
* split at the time darkbot signed on.
*/
//#define PERFORM_TIMER ON
/*
* What user modes do you want for darkbot?
*/
//#define DEFAULT_UMODE "+i-ds"
/* ==== ON IRC ==== */
/*
* Reply to CTCP's? (PING/VERSION).
*/
//#define CTCP ON
/*
* Want your darkbot to always have less than
* 10 min idle? This isn't usually needed since
* darkbots tend to talk a lot. (default = undef)
*/
//#undef ANTI_IDLE
/* ==== ONJOIN ==== */
/*
* When bot joins a channel, sometimes it's hard
* to tell when it's "synced" and is no longer processing
* stuff -- this tells the channel the bot has finished
* syncing. For example, if you try to login while it's
* still syncing, it may just ignore your login request
* until it sees you in the channel. (default = OFF)
*/
//#define DISPLAY_SYNC OFF
/* ================ DATABASE MANAGEMENT ================ */
/* ==== ON START ==== */
/*
* Sort your info2.db on startup? Will take
* forever if u have a large db. If you have dividers or
* any sort of markers on your database and you want to
* preserve their position leave this directive undefined.
* Sorting the database will put all items listed in
* alphabetic order. (default = undef)
*/
//#undef SORT
/*
* When user's do the INFO command, and at
* startup, do you want to find and remove
* duplicates database entries? (default = undef)
*/
//#undef FIND_DUPS
/*
* When duplicate topics are found, do you
* want to save them? (in case some topics
* are accidently deleted) (default = define)
*/
//#define SAVE_DUPS
/* ==== PERMISSIONS ==== */
/*
* Do you want Darkbot to answer questions that match a topic
* without addressing the bot? (default = ON)
*/
//#define GENERAL_QUESTIONS ON
/*
* Turn this ON if you want to be able to use the ADD function
* in private message to the bot. (default = OFF)
*/
//#define ALLOW_ADD_IN_MSG OFF
/*
* Turn this ON if you want to be able to use the DEL function
* in private message to the bot. (default = OFF)
*/
//#define ALLOW_DEL_IN_MSG OFF
/*
* If you want your bot to be able to respond to things asked
* in private messages, turn this option ON. Use the above two
* defines to allow/disallow adding or deleting entries in private.
* (default = OFF)
*/
//#define MSG_RESPONSES OFF
/*
* Toggles the use of encrypted passwords in the userlist.db file.
* Turn this off if you don't want your passwords encrypted. Also
* note that if you're using encrypted passwords and you decide to
* turn this option off, you'll need to redo your userlist.db file.
* Note: If you're new to Darkbot, you may want to turn this option OFF.
*/
//#define ENCRYPT_PASSWORDS OFF
/*
* Minimal access level required to add
* topics? (default = define)
*/
//#define REQ_ACCESS_ADD
/*
* Minimal access level required to to delete
* topics? (default = define)
*/
//#define REQ_ACCESS_DEL
/* ==== LOGS ==== */
/*
* Do you want to log who adds/deletes topics? Log saved
* to dat/logs/add_delete.log (default = define)
*/
//#define LOG_ADD_DELETES
/*
* Do you want to log all privmsg's to your
* darkbot? (will be saved to dat/logs/ dir)
* (default = ON)
*/
//#define LOG_PRIVMSG ON
/* ==== SLEEP DIRECTIVES ==== */
/*
* Level at which user's can make darkbot shut up
* (aka hush). This is useful for help channels when
* they want darkbot to quit talking while they address
* something important in the chan (default = 3)
*/
//#define SLEEP_LEVEL 3
/*
* How many seconds to sleep for? (default = 300 (5 minutes))
*/
//#define SLEEP_TIME 300
/*
* What you would want your Darkbot to say when sleep and
* wake up commands are issued? (If you want you can change
* what is between 'ACTION' and '\1')
*/
//#define GOSLEEP_ACTION "\1ACTION falls asleep... ZzzZZzzZZzz\1"
//#define WAKEUP_ACTION "\1ACTION wakes up from a snooze..\1"
/* ==== DATA SIZE ==== */
/*
* The max length your database replies will be. This will be useful
* to people loading their database into ram - if your data is all
* less than 400 chars, then you can save some ram.... Longer replies
* allows you to do more, for example, with bitwise operator PIPE
* (default = 400)
*/
//#define MAX_DATA_SIZE 400
/*
* The max length your database topics will be. (default = 50)
*/
//#define MAX_TOPIC_SIZE 50
/* ==== OUTPUTS - TIMERS ==== */
/*
* LASTCOMM_TIME is the length of time (in seconds)
* that your bot will not reply to a topic already
* asked. Thus if someone asked your bot about "mirc"
* that question could not be asked again in the
* same format for N seconds (or till the question
* is out of buffer). This prevents the bot from
* falling prey to users who like to repeat.
* (default = 5)
*/
#define LASTCOMM_TIME 5
/*
* BELOW is the output timers. Darkbot does not
* output text without first putting it into a
* queue list. If the bot has several lines of text
* waiting to be sent, it starts to delay longer
* and longer between output, so it can't flood
* itself off of IRC. Explanation:
*
* If text in queue is < OUTPUT1_COUNT, output it.
* If text in queue is > OUTPUT1_COUNT, delay
* OUTPUT1_DELAY seconds. If queue is > OUTPUT2_COUNT,
* delay OUTPUT2_DELAY seconds. If number of text
* in queue is higher than OUTPUT_PURGE_COUNT, then
* just delete all unneeded output (ie; any text
* and notices, but leaving in stuff like kicks
* and modes) The defaults below are recommended,
* as the bot isn't going to flood off. If you are
* having the bot delete output messages and you'd
* like to increase the queue, update the
* OUTPUT_PURGE_COUNT to a larger number. Just keep
* in mind if someone floods your bot with a lot of
* VERSION requests, the bot will sit there outputting
* a lot of version replies instead of deleting them,
* causing it to act as if it's just sitting there not
* doing anything when you ask it something in your
* channel. (defaults = 4) = 1) = 6) = 2)
*/
#define OUTPUT1_COUNT 4
#define OUTPUT1_DELAY 1
#define OUTPUT2_COUNT 6
#define OUTPUT2_DELAY 2
/*
* If still < OUTPUT_PURGE_COUNT and > OUTPUT2_COUNT
* then delay OUTPUT3_DELAY secs. (default = 3)
*/
#define OUTPUT3_DELAY 3
/*
* When all else fails... if more than OUTPUT_PURGE_COUNT
* delete them all! No use in making the bot output slowly
* over a long period of time... imagine if you set this to
* 50, and had an OUTPUT3_DELAY of 3 secs.. thats 50*3 secs
* till the bot is ready to output any new data to you!
* (default = 7)
*/
#define OUTPUT_PURGE_COUNT 7
/* ======== OUTPUT MESSAGES ======== */
/* ==== OUTPUT MESSAGES - ON TOPICS ==== */
/*
* Message to give when adding an existent topic
*/
#define EXISTING_ENTRY "Sorry, there is an existing entry under keyword"
/*
* Message to give when there is no mentioned topic
*/
#define NO_ENTRY "I was unable to find entry:"
/* ==== OUTPUT MESSAGES - ON SEARCH ==== */
/*
* These are the messages Darkbot will give on unaccomplished
* search queries. Change the areas between " " with what
* you want.
*/
#define CANT_FIND "Was unable to find" /* ... */
#define NO_TOPIC "Sorry, I don't have any entry for" /* ... */
#define TRY_FIND "What am I trying to find"
/* ==== OUTPUT MESSAGES - ON NONEXISTENT TEXT ==== */
/*
* Answer to give in case Darkbot's nick is mentioned
* without any further text. Do not UNDEF. If you want
* change only what is between " ". Check next directive.
*/
#define WHUT "hmmm?"
/*
* Gives a random response from dat/whut.rdb instead what
* is specified on 'define WHUT'. (default = ON)
*/
#define RANDOM_WHUT ON
/*
* Answer to give in case there is no reply on Darkbot's database
* Do not UNDEF. If you want change only what is between " ". Check
* next directive.
*/
#define DONNO_Q "*shrug*"
/*
* For those wanting the DONNO_Q response to be random, turn this
* option ON, and darkbot will ignore the default definition and
* use a random line from dat/dunno.db
*/
#define RANDOM_DUNNO ON
/* ======== RANDOM STUFF ========= */
/*
* Will read from a random line in dat/randomstuff.ini and say
* something random in the home channel. ALSO if nothing is said
* in darkbot's home channel it will say a randomstuff every
* RAND_IDLE as long as no one says anything. (default = define)
* UNDEFining this directive will not allow you to add RDBs or
* randomstuff entries. If you really want your bot not to say
* anything from randomstuff.ini and keed adding random replies,
* increase the time _TIME and _IDLE defines to, for example,
* 54750, which corresponds to 365 days :)
*/
#define RANDOM_STUFF
/*
* Time in seconds to randomly say something
* from randomstuff.ini (default = 3600 (1 hour))
*/
#define RAND_STUFF_TIME 3600
/*
* Time in secs to say something in home chan when no
* one says anything. This overrides the RAND_STUFF_TIME
* counter. (default = 1800 (30 minutes))
*/
#define RAND_IDLE 1800
/*
* Level at which user's can on-line add new
* randomstuff topics, this also is the level at which
* users will be able to add RDB topics (default = 2)
*/
//#define RAND_LEVEL 2
/*
* This is a new feature which enables the RANDQ
* channel command, which will output a random
* quote from your randomstuff.ini containing the
* specified search string. ( default = ON )
*/
#define RANDQ ON
/*
* This define backs up your randomstuff file every time
* you add a random quote, in case you would like to do so.
* ( default = #undef )
*/
#undef BACKUP_RANDOMSTUFF
/* ================ IRC - CHANNEL RELATED ================ */
/* ==== REGISTERED USERS ON JOIN ACTIONS ==== */
/*
* Have the bot do auto-greet (setinfo) to registered users?
* (default = ON)
*/
#define JOIN_GREET ON
/*
* This is the length of time to NOT allow someone to be recounted
* when they rejoin your channels, which tends to clutter up
* everyone's screen with the setinfo. This basically keeps track
* of who joined in the last ___ seconds, and does not do their
* setinfo during that amount of time. (default = 60 (seconds))
*/
#define SLASTCOMM_TIME 60
/*
* Have the bot VOICE users when they join? (default = OFF)
*/
#define VOICE_USERS_ON_JOIN OFF
/*
* Have the bot OP users when they login? (default = OFF)
*/
#define OP_USERS_ON_LOGIN OFF
/* ==== USERS LOOKOUT ==== */
/*
* Want to be alerted when a user who joins is in "questionable"
* other channels? This option only works on networks which their
* IRCD's allows NOTICE to be sent using /notice @#chan
* (default = OFF)
*/
//#define DO_WHOIS OFF
/*
* Max length in seconds to keep a lastseen
* (default = 604800 (7 days))
*/
#define MAX_LASTSEEN 604800
/*
* If you change the above time (MAX_LASTSEEN), be sure to
* update the SEEN_REPLY to the respective time length.
* (Change for what you want between " ")
*/
#define SEEN_REPLY "in the last 7 days."
/* ==== COMPLAINT MESSAGES ==== */
/*
* Message Darkbot will send to the channel where it was kicked
* from. (Change for what you want between " ")
*/
#define COMPLAIN_REASON "grrr, kick me again and I'm going to..."
/*
* will complain in the chan that the Darkbot is deoped in.
* (default = OFF)
*/
#define BITCH_ABOUT_DEOP OFF
/*
* What do you want your Darkbot to say when is not
* oped? (Change for what you want between " ")
*/
#if BITCH_ABOUT_DEOP == 1
#define BITCH_DEOP_REASON "grr, someone op me!"
#endif
/* ==== CHAN OP DIRECTIVES ==== */
/*
* Enable this if you want to make your darkbot bloated with
* stuff like !KICK, !UP, !WACK, etc. Basically anything
* dealing with channel modes and kicking commands. This
* includes PERMBANS. On linux, without this, your darkbot
* bin will shrink considerably. (default = ON)
*/
//#define DO_CHANBOT_CRAP ON
/*
* Autotopic time interval in seconds
* (default = 1800 (30 minutes))
*/
#define AUTOTOPIC_TIME 1800
/* ==== KICKS AND BANS ==== */
/*
* What do you want your Darkbot to say when kicks someone?
* Note when you apply a kick with reason this setting will
* not overwrite it. (Change for what you want between " ")
*/
#define DEFAULT_KICK "Requested!"
/*
* Kick people out when they are banned?
*/
#define KICK_ON_BAN OFF
/* ==== KICKS AND BANS - FLOODS ==== */
/*
* Sometimes morons like to /notice flood channels.
* This define will make the bot kick those people
* when they do a channel notice. (default = ON)
*/
#define KICK_ON_CHANNEL_NOTICE ON
/*
* If you want to take it a step further, you can also
* have the bot ban the user@host too. (default = OFF)
*/
#define BAN_ON_CHANNEL_NOTICE OFF
/*
* Finally, we can ban by *@host. This requires the
* above two to be turned on. (default = OFF)
*/
#define BAN_BY_HOST OFF
/* ==== KICKS AND BANS - DARKBOT'S OWN FLOOD PROTECTION ==== */
/*
* Define this if you want your Darkbot to KICK out the
* people who flood it. NOTE: This means flooding your BOT,
* not your CHANNEL. If you don't define this, it will just
* ignore the user. (default = define)
*/
#define FLOOD_KICK
/*
* What do you want your Darkbot to say when someone is
* flooding it? (Change for what you want between " ")
*/
#define FLOOD_REASON "Don't flood!"
/* ================ MISCELLANEOUS ================ */
/*
* Google search feature (default = ON)
*/
//#define GOOGLE ON
/*
* METAR search feature (default = ON)
*/
//#define METAR ON
/*
* WEATHER search feature (default = ON)
*/
//#define WEATHER ON
/*
* TAF search feature (default = ON)
*/
//#define TAF ON
/*
* Bot's online QUIZ (default = OFF)
*/
//#define QUIZ OFF
/*
* How long to wait before giving the answer? (default = 25)
*/
#define QUIZ_TIMER 25
/*
* Don't allow another quiz until this time has expired (since
* the last answer) (default = 20)
*/
#define QUIZ_REPEAT_TIMER 20
/*
* Do you want your bot to do math commands? (default = define)
*/
//#define DO_MATH_STUFF
/*
* Parse luser data? May cause SIG_SEGV on
* some ircd's (ie; non ircu) Basically all this does
* is display network info like opers, servers, avg #
* of users on the servers, etc.
*/
//#define STATUS OFF
/* ================ AID DIRECTIVES ================ */
/*
* Give user's who join a NOTICE with info on how to use the darkbot?
* I don't bother with this anymore since my bot knows how to respond
* to most general questions users ask. If your bot is new and doesn't
* know much, then you may want to have it tell people how to use it.
*/
#define HELP_GREET OFF
/*
* This define just sends a message to the channel, whenever a "Guest"
* user joins, asking the user if they need any help. This is useful
* for help channels.
*/
#define AUTOHELP_GUESTS OFF
/*
* If you change anything on the next 5 directives be careful not to
* remove or change the position of '%s' nor anything outside quotes.
*/
#define L100(s,a,b,c,d,e,f) S("NOTICE %s :I can be triggered by various \
forms of speech, all which must be addressed to me, in one of the \
following formats: %s %s %s or even %s .... In my database, you can \
find a topic by saying my nick, <topic> . eg; \37%s nuke\37 ..... \
to do a search on a word, or partial text, just type: <mynick>, search \
<text> ... eg; \37%s search nuke\37\n",s,a,b,c,d,e,f)
#define L101(a,b,c,d) S("NOTICE %s :I can also be triggered with even more \
human formats: \37%s who is bill gates?\37 .. You can also phrase it \
in a question: \37%s where is msie?\37 ...For more info \
about me, visit http://www.darkbot.org\n",a,b,c,d)
#define L102(a,b,c,d) S("NOTICE %s :Welcome to %s, %s. Before \
asking your question, type %cHELP for a list of help topics.\n", a,b,c,d)
#define mySetinfo "My !setinfo variables are: ^ nick, % Number of joins, & \
Channel, $ user@host. Example: !setinfo ^ has joined & % times!! (also, if \
you make the first char of your SETINFO a \"+\" the setinfo will be shown \
as an ACTION)"
/*(62)
* Below are variables for the data replys
*/
#define myVariables "data variables are: N~ (Nick), C~ (Chan), T~ \
(Time/date) B~ (Botnick), Q~ (Question asked), R~ (random nick), !~ \
(command char), S~ (current Server), P~ (current port) V~ (botVer), W~ \
(db WWW site), H~ (u@h), t~ (unixtime), BAN (sets a ban), TEMPBAN (bans \
for 60 sec)"
/* *******************************---******************************* */
/* --------------- Don't change anything else below! --------------- */
/* ***************************************************************** */
#define fr 3 /* these two are the # of lines per secs */
#define ft 3
#define AIL 1
#define WSEC 10
#define USEC 0
#define RECHECK 45
#define DEFAULT_DBTIMERS_PATH "timers"
#define DEFAULT_LOG_DIR "logs/"
#define DEFAULT_RDB_DIR "rdb"
#define DEFAULT_STATS_FILE "stats.db"
#define DEFAULT_SEEN_FILE "seen.db"
#define DEFAULT_URL2 "info2.db"
#define DUNNO_FILE "dunno"
#define WHUT_FILE "whut"
#define DEFAULT_BACKUP_DUP "backup_dups.db"
#define DEFAULT_ADD_DELETES "logs/add_delete.log"
#define TMP_URL ".info.tmp"
#define TMP_FILE ".file.tmp"
#define DEFAULT_AUTOTOPIC_F "autotopic.ini"
#define DEFAULT_HELPER_LIST "userlist.db"
#define DEFAULT_QUIZ_FILE "quiz.db"
#define DEFAULT_PERFORM "perform.ini"
#define DEFAULT_DEOP "deop.ini"
#define DEFAULT_RAND_SAY "random.ini"
#define DEFAULT_RAND_FILE "randomstuff.ini"
#define DEFAULT_RANDQ_TEMPFILE "randq.tmp"
#define DEFAULT_RAND_BACKUP_FILE "randomstuff.bak"
#define DEFAULT_SERVERS "servers.ini"
#define DEFAULT_PERMBAN "permbans.db"
#define DEFAULT_SETUP "setup.ini"
#define MAX_SEARCH_LENGTH 350
#define ERR_SOCK_OPT -1
#define ERR_TIMED_OUT -1
#define ERR_CONN_REFUSED -2
#define ERR_NOT_ADDR -3
#define ERR_NO_REACH -4
#define ERR_CANT_CONNECT -5
#define ERR_SERVER_BUSY -6
#define ERR_NO_DATA -7
#define SUCCESS 0
#define ON 1
#define OFF 0
#define LEGAL_TEXT "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789_-"
#define SAFE_LIST "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789"
#define LEGAL_NICK_TEXT "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789_-\\|[]{}`"
#define NUMBER_LIST "1234567890"
#define MAX_NICK_LENGTH 35
#ifndef LANG /* If not defined, default to english */
#define LANG 1
#endif
#define NORMALR 0
#define WHUTR 1
#define DUNNOR 2
#define RAND_NORMAL 0
#define RAND_ACTION 1
#define RAND_RAW 2
/* -------------------------------------------------- */
#if defined _WIN32 || defined __CYGWIN__ || defined __CYGWIN32__ || defined __MINGW32__
# ifndef WIN32
# define WIN32
# endif
#endif
#include "langs/lang.h"
#define _GNU_SOURCE 1
#include <ctype.h>
#include <sys/resource.h>
/* Here we sort out what to do based on some autoconf detected things. */
#if HAVE_ERRNO_H
# include <errno.h>
#endif
#ifndef errno
extern int errno;
#endif
#if HAVE_NETDB_H
# include <netdb.h>
#endif
#if HAVE_NETINET_IN_H
# include <netinet/in.h>
#endif
#if HAVE_ARPA_INET_H
# include <arpa/inet.h>
#endif
#include <assert.h>
#if HAVE_FCNTL_H
# include <fcntl.h>
#endif
#ifdef WIN32
# include <windows.h>
#endif
#include <signal.h>
#include <sys/stat.h>
#include <stdio.h> /* The only one we can guarantee. */
#if HAVE_STDBOOL_H
# include <stdbool.h>
#else
# if ! HAVE__BOOL
# ifdef __cplusplus
typedef bool _Bool;
# else
typedef unsigned char _Bool;
# endif
# endif
# define bool _Bool
# define false 0
# define true 1
# define __bool_true_false_are_defined 1
#endif
#if STDC_HEADERS
# include <string.h>
# include <stdarg.h>
# include <stdlib.h>
#else
# if !HAVE_STRCHR
# define strchr index
# define strrchr rindex
# endif
char *strchr (), *strrchr ();
# if !HAVE_MEMMOVE
# define memcpy(d, s, n) bcopy ((s), (d), (n))
# define memmove(d, s, n) bcopy ((s), (d), (n))
# endif
#endif
#if HAVE_SYS_SOCKET_H
# include <sys/socket.h>
#endif
#if HAVE_UNISTD_H
#include <sys/types.h>
#include <unistd.h>
#endif
#if TIME_WITH_SYS_TIME
# include <sys/time.h>
# include <time.h>
#else
# if HAVE_SYS_TIME_H
# include <sys/time.h>
# else
# include <time.h>
# endif
#endif
#ifndef EXIT_SUCCESS
# define EXIT_SUCCESS 0
# define EXIT_FAILURE 1
#endif
-#include "compat/stat-macros.h"
-#include "compat/minmax.h"
+#include "stat-macros.h"
+#include "minmax.h"
+
+
+#if !HAVE_MEMSET
+# define rpl_memset
+#endif
+
+#if !HAVE_NANOSLEEP
+# define rpl_nanosleep
+#endif
+
+#if !HAVE_SNPRINTF
+# define snprintf rpl_snprintf
+#endif
+
+#if !HAVE_STRCASECMP
+# define rpl_strcasecmp
+#endif
+
+#if !HAVE_STRCASESTR
+# define rpl_strcasestr
+#endif
+
+#if !HAVE_STRNDUP
+# define rpl_strndup
+#endif
+
+#if !HAVE_STRSPN
+# define rpl_strspn
+#endif
+
+#if !HAVE_STRSTR
+# define rpl_strstr
+#endif
#define ERR_CANT_MALLOC -1
#define ERR_OPEN_SOCKET -2
#define ERR_WRITE_SOCKET -3
#define ERR_READ_SOCKET -5
#define ERR_NO_DOCUMENTS -6
#define RANDQ_NORMAL 0
#define RANDQ_CASE 1
#define RANDQ_RAND 2
#define RDB_NORMAL 0
#define RDB_ACTION 1
#define RDB_RAW 2
/* ////////////////////////////////////////////////////////////////////// */
#define RESERVED1 "EXPLAIN"
#define RESERVED2 "DECLARE"

File Metadata

Mime Type
text/x-diff
Expires
Mon, Nov 25, 12:31 (1 d, 9 h)
Storage Engine
blob
Storage Format
Raw Data
Storage Handle
2260167
Default Alt Text
(26 KB)

Event Timeline

Nasqueron DevCentral · If it had been much bigger the moon would have had a core of ice. · Powered by Phabricator