Page MenuHomeDevCentral
Files F3743987

D2381.id5990.diff
No OneTemporary
Actions

D2381.id5990.diff
View Options

diff --git a/PORTS b/PORTS
--- a/PORTS
+++ b/PORTS
@@ -37,4 +37,5 @@
39080 Cachet HTTP
41080 ACME DNS server HTTP
42080 Jenkins HTTP - CI
+ 43080 Hauk
50000 Jenkins master's port for JNLP-based Jenkins agents - CD
diff --git a/pillar/paas/docker.sls b/pillar/paas/docker.sls
--- a/pillar/paas/docker.sls
+++ b/pillar/paas/docker.sls
@@ -66,6 +66,9 @@
- library/sentry
- tianon/exim4
+ # Hauk
+ - bilde2910/hauk
+
# -------------------------------------------------------------
# Networks
#
@@ -430,6 +433,13 @@
title: Nasqueron Photos
max_album_length: 16
+ # Hauk
+ hauk:
+ hauk:
+ app_port: 43080
+ host: geo.nasqueron.org
+ api_entry_point: /hauk
+
# Sentry
# The Sentry instance uses a Redis and a PostgreSQL instance,
# declared above.
diff --git a/roles/paas-docker/containers/files/hauk/config.php.jinja b/roles/paas-docker/containers/files/hauk/config.php.jinja
new file mode 100644
--- /dev/null
+++ b/roles/paas-docker/containers/files/hauk/config.php.jinja
@@ -0,0 +1,282 @@
+<?php
+
+const CONFIG = [
+
+// The type of storage backend Hauk will use. Valid values include:
+// MEMCACHED, REDIS
+//
+// For MEMCACHED, you need either the `memcached` or `memcache` extensions
+// enabled in PHP.
+//
+// For REDIS, you need `redis` extension enabled. Note that `redis` depends on
+// `igbinary`, so if you get an error that a redis extension was not found, even
+// though you enabled `redis`, you may have to also install and enable
+// `igbinary` in PHP.
+"storage_backend" => MEMCACHED,
+
+/*----------------------------------------------------------------------------*\
+| MEMCACHED SPECIFIC SETTINGS |
+\*----------------------------------------------------------------------------*/
+
+// Connection to memcached for data storage. To connect via UNIX socket instead
+// of TCP, set host to 'unix:///path/to/memcached.sock' and port to 0.
+"memcached_host" => 'localhost',
+"memcached_port" => 11211,
+
+// If you use SASL authentication, change both `memcached_binary` and
+// `memcached_use_sasl` to true, and enter your SASL username and password.
+// Note: SASL authentication is only supported in the PHP `memcached` extension!
+// If you are using `memcache` and need SASL, consider switching to `memcached`.
+"memcached_binary" => false,
+"memcached_use_sasl" => false,
+"memcached_sasl_user" => "",
+"memcached_sasl_pass" => "",
+
+// A prefix to use for all variables sent to memcached. Useful if you have a
+// shared memcached instance or run multiple instances of Hauk.
+"memcached_prefix" => 'hauk',
+
+/*----------------------------------------------------------------------------*\
+| REDIS SPECIFIC SETTINGS |
+\*----------------------------------------------------------------------------*/
+
+// Connection to Redis for data storage. To connect via UNIX socket instead of
+// TCP, set host to '/path/to/redis.sock'.
+"redis_host" => 'localhost',
+"redis_port" => 6379,
+
+// If you use password authentication in Redis, set `redis_use_auth` to true and
+// enter the password in `redis_auth`.
+"redis_use_auth" => false,
+"redis_auth" => '',
+
+// A prefix to use for all variables sent to Redis. Useful if you have a shared
+// Redis instance or run multiple instances of Hauk.
+"redis_prefix" => 'hauk',
+
+/*----------------------------------------------------------------------------*\
+| AUTHENTICATION |
+\*----------------------------------------------------------------------------*/
+
+// Users must be authenticated to use the Hauk server. The default
+// authentication method is using a static server password that is shared by all
+// users, without the need for a username. You can, however, use other
+// authentication methods. Valid values here include:
+//
+// - PASSWORD: Use a static, shared server password for everyone
+// - HTPASSWD: Require a username and separate password for each user
+// - LDAP: Authenticate users against an LDAP server
+"auth_method" => PASSWORD,
+
+/*----------------------------------------------------------------------------*\
+| PASSWORD AUTHENTICATION |
+\*----------------------------------------------------------------------------*/
+
+// A hashed password that is required for creating sessions and posting location
+// data to Hauk. To generate this value on the terminal:
+// - MD5 (insecure!): openssl passwd -1
+// - bcrypt (secure): htpasswd -nBC 10 "" | tail -c +2
+"password_hash" => '$2y$10$4ZP1iY8A3dZygXoPgsXYV.S3gHzBbiT9nSfONjhWrvMxVPkcFq1Ka',
+// Default value above is empty string (no password) and is VERY INSECURE.
+// Trust me, you really should change this unless you intentionally want a
+// public instance that anyone in the world can use freely.
+//
+// Also note that users have the option to save the server password locally on
+// their devices using a "Remember password" checkbox. If they choose to do so,
+// the password will be stored in plain text (unhashed) on their devices. You
+// are encouraged to generate a random password to prevent risks associated with
+// credential reuse, should the password somehow be leaked from their devices.
+
+/*----------------------------------------------------------------------------*\
+| HTPASSWD AUTHENTICATION |
+\*----------------------------------------------------------------------------*/
+
+// A file that contains a pairing between users and hashed passwords. To
+// generate this file on the terminal:
+// - htpasswd -cBC 10 /etc/hauk/users.htpasswd <username>
+// To add additional users to an existing file:
+// - htpasswd -BC 10 /etc/hauk/users.htpasswd <username>
+"htpasswd_path" => '/etc/hauk/users.htpasswd',
+
+/*----------------------------------------------------------------------------*\
+| LDAP AUTHENTICATION |
+\*----------------------------------------------------------------------------*/
+
+// URI that points to the LDAP server. Use "ldap://" for unencrypted LDAP as
+// well as when using StartTLS, use "ldaps://" for regular LDAP over TLS. Port
+// number is typically 389 (ldap) or 636 (ldaps).
+"ldap_uri" => 'ldaps://ldap.example.com:636',
+
+// Whether or not you wish to use StartTLS. StartTLS cannot be used in
+// combination with `ldaps`.
+"ldap_start_tls" => false,
+
+// Base DN to search for users.
+"ldap_base_dn" => 'ou=People,dc=example,dc=com',
+
+// DN to bind to to perform user search. This should ideally be a read-only
+// account as the password is stored in plain-text in this config file.
+"ldap_bind_dn" => 'cn=admin,dc=example,dc=com',
+"ldap_bind_pass" => 'Adm1nP4ssw0rd',
+
+// A filter that finds the user trying to authenticate. %s is substituted with
+// the username provided by the user in the app.
+//
+// You can also use this to restrict access to Hauk to only authorized users if
+// you do not wish to grant all LDAP users permission to use your Hauk instance.
+// For example, (&(uid=%s)(memberOf=cn=HaukUsers,ou=Groups,dc=example,dc=com))
+// will only let the user connect if they are part of the "HaukUsers" group in
+// the "Groups" OU.
+"ldap_user_filter" => '(uid=%s)',
+
+/*----------------------------------------------------------------------------*\
+| GENERAL SETTINGS |
+\*----------------------------------------------------------------------------*/
+
+// Hauk v1.4 and on allows you to request a custom link ID instead of having the
+// server randomly generate one. Custom links can use characters A-Z, a-z, 0-9,
+// - (dash), and _ (underscore). If you want to disallow the option to request
+// custom links, set this to false.
+//
+// If a user requests particular custom link that is already in use, that user
+// will not have their request honored and will get a randomly generated link
+// instead.
+"allow_link_req" => true,
+
+// If you want certain links to only be usable by some users, you can reserve
+// them here. The following example reserves https://example.com/?WheresAlice
+// for user "alice" only, and reserves https://example.com/?TheRealBob
+// for use by both "bob" and "charlie".
+//
+// If you use Tasker or another automation platform to automatically start
+// sharing to a specific link ID, it's a good idea to specify it here so that
+// others cannot use it while you are inactive.
+//
+// Note that for this setting to have any effect, you have to specify an
+// auth_method that requires both a username and a password, such as HTPASSWD.
+"reserved_links" => [
+ 'WheresAlice' => ['alice'],
+ 'TheRealBob' => ['bob', 'charlie'],
+],
+
+// If you want to enable pre-approved custom links only, you can choose to
+// enable reservation whitelist mode. If this setting is set to true, custom
+// link IDs will only be accepted if they are present in the reserved_links
+// array above - requests to share to other links than those in the array will
+// not be honored.
+"reserve_whitelist" => false,
+
+// The type of links to generate when making new links for shares. Can be any
+// of the following:
+//
+// | Link style | Example | No. of combinations | Avg. bruteforce time |
+// +----------------------------+---------------------------------------+-----------------------+-------------------------------+
+// | LINK_4_PLUS_4_UPPER_CASE | V8LQ-H2UM | 1.79 * 10^12 (34^8) | 28.3 years |
+// | LINK_4_PLUS_4_LOWER_CASE | qae3-ulna | 2.82 * 10^12 (36^8) | 44.7 years |
+// | LINK_4_PLUS_4_MIXED_CASE | HEq3-tgJ1 | 1.28 * 10^14 (58^8) | 2030 years |
+// | LINK_UUID_V4 | 09c8a3b1-e78f-48b1-a604-0da49e99cb5d | 5.32 * 10^36 (2^122) | 84.2 septillion years |
+// | LINK_16_HEX | 6cde14c4c6551b41 | 1.84 * 10^19 (2^64) | 292 million years |
+// | LINK_16_UPPER_CASE | WVHA2FNMRT9HSKJK | 3.19 * 10^24 (34^16) | 50.6 trillion years |
+// | LINK_16_LOWER_CASE | bdyslxszs14cj359 | 7.95 * 10^24 (36^16) | 126 trillion years |
+// | LINK_16_MIXED_CASE | 1Ayh2yUXDe3sdF3S | 1.64 * 10^28 (58^16) | 260 quadrillion years |
+// | LINK_32_HEX | 22adf21f11491ae8f3ae128e23a6782f | 3.40 * 10^38 (2^128) | 5.39 octillion years |
+// | LINK_32_UPPER_CASE | R88M1Z2KPL27XN8MF73KCRYPHJD4QQMT | 1.02 * 10^49 (34^32) | 161 undecillion years |
+// | LINK_32_LOWER_CASE | itgbolrbq1c02eot5o46c5wixhdrdb5m | 6.33 * 10^49 (36^32) | 1 duodecillion years |
+// | LINK_32_MIXED_CASE | qf5pqr2UKTUT6vREPPSTuqSKkCMojF17 | 2.69 * 10^56 (58^32) | 4.26 quattuordecillion years |
+//
+// For any MIXED_CASE variants, upper-case I and lower-case L will not appear
+// because they are visually very similar and are easily confused. For the same
+// reason, MIXED_CASE and UPPER_CASE variants will not generate 0 and O.
+//
+// The default value is LINK_4_PLUS_4_UPPER_CASE, which is still considered very
+// secure. The bruteforce times in the table below are the average time it would
+// take to find a valid sharing link, when there is one link active, at 1000
+// guesses per second. For the default setting, this means it would take almost
+// 45 years to find the link.
+//
+// This is assuming that the link is active 24/7 for that entire time. If you
+// only have a link active 2% of the time, it would take over 2200 years.
+//
+// At 1000 guesses per second, you will likely notice that your server is
+// noticeably slower and rapidly filling up with access logs.
+//
+// Very long links are also time-consuming to type, should you find yourself
+// in need of typing in a link manually on another computer. This is the reason
+// that short links are default.
+//
+// ---- PLEASE NOTE ----
+// This option is provided to you only because several people have requested it
+// as a convenience. You are free to change it, but you should know that
+// changing the default here gives you, for all intents and purposes, no
+// security advantage in practice.
+//
+"link_style" => LINK_4_PLUS_4_UPPER_CASE,
+
+// Leaflet tile URI template for the map frontend. Here are some examples:
+//
+// - OpenStreetMap directly:
+// https://{s}.tile.openstreetmap.org/{z}/{x}/{y}.png
+// - Mapbox:
+// https://api.tiles.mapbox.com/v4/mapbox.streets/{z}/{x}/{y}.png?access_token=YOUR_ACCESS_TOKEN
+// - Thunderforest:
+// https://{s}.tile.thunderforest.com/neighbourhood/{z}/{x}/{y}.png?apikey=YOUR_API_KEY
+// - Esri:
+// https://server.arcgisonline.com/ArcGIS/rest/services/World_Street_Map/MapServer/tile/{z}/{y}/{x}
+// - OpenMapSurfer:
+// https://maps.heigit.org/openmapsurfer/tiles/roads/webmercator/{z}/{x}/{y}.png
+// - Hydda (OSM Sweden):
+// https://{s}.tile.openstreetmap.se/hydda/full/{z}/{x}/{y}.png
+//
+// Make sure you have permission to use the source you choose, and also use a
+// proper attribution for that provider.
+"map_tile_uri" => 'https://{s}.tile.openstreetmap.org/{z}/{x}/{y}.png',
+
+// Attribution HTML code to be displayed in the bottom right corner of the map.
+// The default value is suitable for OpenStreetMap tiles.
+"map_attribution" => 'Map data &copy; <a href="https://www.openstreetmap.org/">OpenStreetMap</a> contributors, <a href="https://creativecommons.org/licenses/by-sa/2.0/">CC-BY-SA</a>',
+
+// Default and maximum zoom levels allowed on the map (0-20), higher value means
+// closer zooming.
+"default_zoom" => 14,
+"max_zoom" => 19,
+
+// Maximum duration of a single location share, in seconds.
+"max_duration" => 86400,
+
+// Minimum time between each location update, in seconds.
+"min_interval" => 1,
+
+// The time that should pass without any location updates received, in seconds,
+// before the user is marked "offline" on the map.
+"offline_timeout" => 30,
+
+// The timeout in seconds for map update requests from the map view. If a web
+// request takes this long without a response, the map viewer is considered
+// offline and will get a warning notifying them that they have lost their
+// network connection.
+"request_timeout" => 10,
+
+// Maximum number of data points stored for each share before old points are
+// deleted. Map clients will see up to this amount of data points when they load
+// the page.
+"max_cached_pts" => 3,
+
+// Maximum number of data points that may be visible on the map at any time.
+// This is used to draw trails behind the current location map marker. Higher
+// values will show longer trails, but may reduce performance.
+"max_shown_pts" => 100,
+
+// Number of seconds of data that should be used to calculate velocity.
+"v_data_points" => 2,
+
+// The color of the marker trails. HTML color name or #rrggbb hex color code.
+"trail_color" => '#d80037',
+
+// The unit of measurement of velocity. Valid are:
+// KILOMETERS_PER_HOUR, MILES_PER_HOUR, METERS_PER_SECOND
+"velocity_unit" => KILOMETERS_PER_HOUR,
+
+// The publicly accessible URL to reach Hauk, with trailing slash.
+"public_url" => '{{ url }}'
+
+];
diff --git a/roles/paas-docker/containers/hauk.sls b/roles/paas-docker/containers/hauk.sls
new file mode 100644
--- /dev/null
+++ b/roles/paas-docker/containers/hauk.sls
@@ -0,0 +1,57 @@
+# -------------------------------------------------------------
+# Salt — Provision Docker engine
+# - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
+# Project: Nasqueron
+# Created: 2021-07-30
+# License: Trivial work, not eligible to copyright
+# -------------------------------------------------------------
+
+{% set has_selinux = salt['grains.get']('selinux:enabled', False) %}
+{% set containers = pillar['docker_containers'][grains['id']] %}
+
+{% for instance, container in containers['hauk'].items() %}
+
+# -------------------------------------------------------------
+# Storage directory
+# - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
+
+/srv/hauk/{{ instance }}:
+ file.directory:
+ - user: 9001
+ - makedirs: True
+
+/srv/hauk/{{ instance }}/config.php:
+ file.managed:
+ - source: salt:///roles/paas-docker/containers/files/hauk/config.php.jinja
+ - template: jinja
+ - mode: 644
+ - context:
+ url: https://{{ container['host'] }}{{ container['api_entry_point'] }}/
+
+{% if has_selinux %}
+selinux_context_{{ instance }}_data:
+ selinux.fcontext_policy_present:
+ - name: /srv/hauk/{{ instance }}
+ - sel_type: container_file_t
+
+selinux_context_{{ instance }}_data_applied:
+ selinux.fcontext_policy_applied:
+ - name: /srv/hauk/{{ instance }}
+{% endif %}
+
+# -------------------------------------------------------------
+# Container
+# - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
+
+{{ instance }}:
+ docker_container.running:
+ - detach: True
+ - interactive: True
+ - image: bilde2910/hauk
+ - binds: /srv/hauk/{{ instance }}/var:/etc/hauk
+ - ports:
+ - 80
+ - port_bindings:
+ - {{ container['app_port'] }}:80
+
+{% endfor %}
diff --git a/roles/paas-docker/nginx/files/vhosts/hauk.conf b/roles/paas-docker/nginx/files/vhosts/hauk.conf
new file mode 100644
--- /dev/null
+++ b/roles/paas-docker/nginx/files/vhosts/hauk.conf
@@ -0,0 +1,56 @@
+# -------------------------------------------------------------
+# Configuration for Docker PaaS front-end nginx
+# - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
+# Author: Sébastien Santoro aka Dereckson
+# Created: 2021-07-30
+# Source file: roles/paas-docker/nginx/files/vhosts/hauk.conf
+# -------------------------------------------------------------
+#
+# <auto-generated>
+# This file is managed by our rOPS SaltStack repository.
+#
+# Changes to this file may cause incorrect behavior
+# and will be lost if the state is redeployed.
+# </auto-generated>
+
+# -------------------------------------------------------------
+# Application - {{ fqdn }}
+# - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
+
+server {
+ listen 80;
+ listen [::]:80;
+ server_name {{ fqdn }};
+
+ include includes/letsencrypt;
+
+ return 301 https://$host$request_uri;
+}
+
+server {
+ server_name {{ fqdn }};
+
+ include includes/tls;
+ ssl_certificate /srv/letsencrypt/etc/live/{{ fqdn }}/fullchain.pem;
+ ssl_certificate_key /srv/letsencrypt/etc/live/{{ fqdn }}/privkey.pem;
+
+ add_header Referrer-Policy same-origin always;
+ add_header X-Frame-Options DENY always;
+ add_header X-Content-Type-Options nosniff always;
+ add_header X-XSS-Protection "1; mode=block" always;
+ add_header X-Robots-Tag "noindex, nofollow" always;
+
+ include includes/letsencrypt;
+
+ location {{ args['api_entry_point'] }}/ {
+ rewrite ^{{ args['api_entry_point'] }}(/.*)$ $1 break;
+ proxy_redirect off;
+
+ proxy_pass http://localhost:{{ app_port }};
+ include includes/proxy_params;
+ }
+
+ root /var/wwwroot-502/_default;
+ error_page 502 /502.html;
+ location /502.html {}
+}

File Metadata

Mime Type
text/plain
Expires
Sat, Nov 16, 02:17 (4 h, 34 m)
Storage Engine
blob
Storage Format
Raw Data
Storage Handle
2246888
Default Alt Text
D2381.id5990.diff (19 KB)

Event Timeline

Nasqueron DevCentral · If it had been much bigger the moon would have had a core of ice. · Powered by Phabricator