Page MenuHomeDevCentral
Paste P261

SMART sample on a Orin disk (Dereckson personal workstation)
ActivePublic
Actions

Authored by dereckson on Oct 13 2017, 21:52.
smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.12.14-200.fc25.x86_64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Maxtor DiamondMax Plus 9
Device Model: Maxtor 6Y160M0
Serial Number: Y48C1BWE
Firmware Version: YAR51HW0
User Capacity: 163,927,522,816 bytes [163 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7 T13/1532D revision 0
Local Time is: Fri Oct 13 23:52:32 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 302) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 72) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
3 Spin_Up_Time 0x0027 205 201 063 Pre-fail Always - 13190
4 Start_Stop_Count 0x0032 252 252 000 Old_age Always - 2316
5 Reallocated_Sector_Ct 0x0033 253 253 063 Pre-fail Always - 0
6 Read_Channel_Margin 0x0001 253 253 100 Pre-fail Offline - 0
7 Seek_Error_Rate 0x000a 253 239 000 Old_age Always - 0
8 Seek_Time_Performance 0x0027 249 238 187 Pre-fail Always - 33632
9 Power_On_Minutes 0x0032 177 177 000 Old_age Always - 193h+15m
10 Spin_Retry_Count 0x002b 253 249 157 Pre-fail Always - 0
11 Calibration_Retry_Count 0x002b 253 252 223 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 246 246 000 Old_age Always - 2772
192 Power-Off_Retract_Count 0x0032 253 253 000 Old_age Always - 0
193 Load_Cycle_Count 0x0032 253 253 000 Old_age Always - 0
194 Temperature_Celsius 0x0032 253 253 000 Old_age Always - 47
195 Hardware_ECC_Recovered 0x000a 253 252 000 Old_age Always - 3623
196 Reallocated_Event_Count 0x0008 253 253 000 Old_age Offline - 0
197 Current_Pending_Sector 0x0008 253 253 000 Old_age Offline - 0
198 Offline_Uncorrectable 0x0008 253 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0008 199 199 000 Old_age Offline - 0
200 Multi_Zone_Error_Rate 0x000a 253 252 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x000a 253 248 000 Old_age Always - 29
202 Data_Address_Mark_Errs 0x000a 253 252 000 Old_age Always - 0
203 Run_Out_Cancel 0x000b 253 252 180 Pre-fail Always - 2
204 Soft_ECC_Correction 0x000a 253 252 000 Old_age Always - 0
205 Thermal_Asperity_Rate 0x000a 253 252 000 Old_age Always - 0
207 Spin_High_Current 0x002a 253 249 000 Old_age Always - 0
208 Spin_Buzz 0x002a 253 252 000 Old_age Always - 0
209 Offline_Seek_Performnce 0x0024 194 192 000 Old_age Offline - 0
99 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
100 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
101 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
SMART Error Log Version: 1
Warning: ATA error count 23 inconsistent with error log pointer 5
ATA Error Count: 23 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 23 occurred at disk power-on lifetime: 24471 hours (1019 days + 15 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 c0 ce e8 e9 Error: ICRC, ABRT at LBA = 0x09e8cec0 = 166252224
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 00 c0 ce e8 e9 00 1d+12:29:24.336 READ DMA
c8 00 08 e8 d2 09 e0 00 1d+12:29:24.320 READ DMA
c8 00 60 48 12 cc e0 00 1d+12:29:24.320 READ DMA
c8 00 80 c0 11 cc e0 00 1d+12:29:24.320 READ DMA
c8 00 08 c0 c9 09 e0 00 1d+12:29:24.304 READ DMA
Error 22 occurred at disk power-on lifetime: 12569 hours (523 days + 17 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 67 ce 06 e0 Error: UNC 8 sectors at LBA = 0x0006ce67 = 446055
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 67 ce 06 e0 00 00:04:46.304 READ DMA
c8 00 10 87 1f 41 e0 00 00:04:46.304 READ DMA
c8 00 08 7f 1f 41 e0 00 00:04:46.288 READ DMA
c8 00 08 77 1f 41 e0 00 00:04:46.288 READ DMA
c8 00 08 6f 1f 41 e0 00 00:04:46.288 READ DMA
Error 21 occurred at disk power-on lifetime: 12569 hours (523 days + 17 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 60 c7 cd 06 e0 Error: UNC 96 sectors at LBA = 0x0006cdc7 = 445895
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 00 c7 cd 06 e0 00 00:04:40.496 READ DMA
c8 00 f0 cf bd 06 e0 00 00:04:40.496 READ DMA
c8 00 08 c7 bd 06 e0 00 00:04:40.480 READ DMA
c8 00 10 bf 00 0c e0 00 00:04:40.480 READ DMA
c8 00 10 d7 53 1b e0 00 00:04:40.480 READ DMA
Error 20 occurred at disk power-on lifetime: 11640 hours (485 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 59 22 b6 ec Error: UNC 8 sectors at LBA = 0x0cb62259 = 213262937
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 59 22 b6 ec 00 01:38:16.640 READ DMA
27 00 00 00 00 00 e0 00 01:38:16.624 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 01:38:16.624 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 01:38:16.624 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 01:38:16.624 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 19 occurred at disk power-on lifetime: 11640 hours (485 days + 0 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 59 22 b6 ec Error: UNC 8 sectors at LBA = 0x0cb62259 = 213262937
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 59 22 b6 ec 00 01:38:15.616 READ DMA
27 00 00 00 00 00 e0 00 01:38:15.600 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 01:38:15.600 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 01:38:15.600 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 01:38:15.600 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 11634 -
# 2 Short offline Completed without error 00% 11186 -
# 3 Short offline Completed without error 00% 11186 -
# 4 Short offline Completed without error 00% 11182 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Event Timeline

dereckson edited the content of this paste. (Show Details)Oct 13 2017, 21:52
dereckson changed the title of this paste from untitled to SMART sample on a Orin disk (Dereckson personal workstation).
dereckson updated the paste's language from autodetect to autodetect.
Nasqueron DevCentral · If it had been much bigger the moon would have had a core of ice. · Powered by Phabricator